Professional cold room production and installation,Since 1994 English|Spanish
Cold Room Panel
Cold Room Door
Coldroom Parts

Home > Cold Room Junction box

Cold room production

Focus on cold room production, reasonable design, perfect installation and careful debugging
Junction box-1
Junction box-2
Junction box-1
Junction box-2

Junction box

Junction box

Junction box made by imported thermosetting plastic ABS or (PC) polycarbonate

Junction box detail:

1.Good quality, the raw materials of commodities are processed by injection molding with new upgraded materials.
2.made by imported thermosetting plastic ABS or (PC) polycarbonate.
3.Shell thickness: the average thickness of the thin part of the box is 3mm, the thickness of the key position is increased (not easy to deform), the impact compressive strength is ik07 (not crushed); the flame-retardant V0 (resistant to the baking of height width ratio, not faded in long-term application), light and handy (easy to install, or move freely)

Junction box-Cold room application

Cold room application

安裝方法
1.布线方法:1.內部按装—小盒子內部供着PCB线路板或DIN路轨元器件安裝的凸模,及内置的铜布线螺帽(每只防水盒內部都装有 少两个左右的很基本的M4的铜螺母)2.外界按装--可根据盒体低部的安裝孔立即固定不动于墙壁(可根据小盒子的4个角,立即用螺钉或钢钉固定不动在墙壁或木板上。)
2出入线孔:防水盒能够随便跟据顾客的应用规定在上边打孔,(打孔部位及打孔尺寸能够依照顾客特定规定生产加工。)打孔后能够配有配套设施的防潮夹持连接头,超过防潮实际效果。

Yangtzecooling Goals

Customize your cold room project.

Excellent cold room panel production process

  • High quality polyurethane material foaming
    Polyurethane Materials

    High quality polyurethane material foaming

  • 20000 square meters cold room panel monthly
    Several production lines

    20000 square meters cold room panel monthly

  • Cold room design according to your needs
    Cold room design

    Cold room design according to your needs

  • Professional cold room installation
    Professional installation team

    Install a durable cold room for you