cold room sliding door

Category:

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+Pin on Pinterest
INQUIRY

cold room sliding door

未标题-1

Introduction:

Slide way: it was made of corrosion-resistant aluminium alloy material and nylon roller,S/S rollers shelf,screw、nut、washer.

Up-open and Down-close:the system installed are inner of slide-way.it is take advantage of gravity theory to make sure the door keep in hermetic.

Handle:  stronge stainless steel handle, easy and convenient.

 

 

Manual sliding door specification:

Door hole size: max size:  7000mmx5000mm

Suitable condition temperature: -70℃ to 100℃

Door panel thick: 80mm   100mm  120mm  150mm

 

Driving way:

manual Antifreezing heating wires: the low and medium temperature’s storage for choose match.

Safely lock: No need any tool that It can be turn on the lock manually in the inner of the storage

Door panel marerial of surface:  stainless steel, PPGI

Core material: Polyurethane(PU)

Hermetic material :  airtight and wear-resisting of Rubber Sealing Bar 

Door panel’s QTY: it can be choose single or double

Power: 220V/50Hz or 24V/50hZ.(for heating wires)

 

Auto sliding door specification:

Electricity control device: including control box, gear wheel, electromagnetism clutch, push-button switch box, the draw a rope in switch,control switch.

Safety performance: electric doors are fitted with safety sensors, anything lay a finger on the door side when the door closed,the door panel to immediately stop and prompt bounce back to the open position.

Door hole size: max size:  4000mmx5000mm.

Condition temperature suitable : -70℃ to 100℃

Door panel thickness: 80mm   100mm  120mm  150mm

Antifreezing heating wires:

the low and medium temperature’s storage for choose match.

Safely lock:

No need any tool that It can be turn on the lock manually in the inner of the storage

The open door control:

standard configured to push-button,draw a rope,control.

Safely device:

it fitted with satety sensors of door side.

Door panel marerial of surface: 

stainless steel, PPGI or aluminium.

Core material:

Polyurethane(PU)

Hermetic material :

airtight and wear-resisting of Rubber Sealing Bar 

Door panel’s QTY:

it can be choose single or double

Power: 220V/50Hz or 24V/50hZ.(for heating wires) : 3X380/50Hz (for Electrical Motor).

 

 

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+Pin on Pinterest

Leave a Reply

Your email address will not be published. Required fields are marked *

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad