Sliding Freezer Doors
The doors suitable cold storage temperature not lower than -40 C as freezer cold room. Blast cold storage, marine cold room and constant temperature workshop environment.
Good thermal insulation, sealing effect. When the temperature difference between the inside and outside of the reservoir is greater than 50℃, and the relative humidity is greater than 80%.
Door leaf panel thickness of 100mm (available for 150 or 200mm) in the open door, transmission, sealing and other aspects of its originality, favored by the users.
The door panel insulated made of injection machine with high pressure foaming polyurethane, has reliable insulation and heat insulation performance.
The door is opened and closed by manual push-pull translation, the track with variable line, the door in place, will naturally fall and press the door and the floor.
When the door is opened, it will synchronize away from the door frame and rise, reducing the friction between the sealing trip and the door frame, extend the service life of the sealing trip.
When the door is open and leave the door frame synchronization will rise, reducing the friction sealing strip and the door frame, floor, prolong the service life of a sealing strip.
The door sealing trip with special supporting the processing of low temperature, oil, anti-aging high-strength, high-elastic hollow double-tube rubber seal
The upper and lower sides of the door are adjustable compression device and with good sealing.
Safety : When the staff mistakenly locked in the library, as long as a little pull out of danger, the door can be successfully opened